Tc-electronic G-Force Manuel d'utilisateur télécharger pdf (Page 10)

POWER

Press and hold the Power

switch for about 3 seconds,

then release to power off.

IN/OUT KNOBS

The overall Input level is

adjusted via the knob in the

upper left corner of the G-

Force. The Input should aver-

age approx. -3 to -6 dB

on the Input meters.

Set your output level using the

Output knob.

CARD SLOT

The PCMCIA slot can be used

for storing and loading presets.

Use Type 1 PC Cards with a

minimum 64 KBytes of SRAM.

BILLBOARD

The Billboard of the G-Force is capable of

showing preset number and name, Tempo

and a global message that you can write

into the G-Force (refer to Billboard in the

Utility section). Both Tuner and Tempo use

the Billboard to display information as well.

Beneath the Billboard you will find four

indicators, displaying: Preset Edited,

incoming MIDI information, incoming Pedal

information and internal Overflow.

The two lower meters will indicate gain

reduction in the Compressor and Noise

Gate, but are also used as tuner indicators

when Tuner is active.

METERS

These meters indicate the

level of Left and Right

inputs.

The Input level of the G-

Force automatically opti-

mizes the signal to noise

ratio via a small relay in

the input section. You will

see a prompt on the dis-

play and may hear a small

click when the input gain

range is changed.

THE FRONT PANEL

8

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 62 63

Commentaires sur ces manuels

Pas de commentaire