Tc-electronic G-Force Manuel d'utilisateur télécharger pdf (Page 17)

HOW TO

- Scroll horizontal until you see Ext1 in the top line of

the display, using the Value wheel.

- Scroll vertically using the Parameter wheel until the

cursor is placed on the line where Pitch “In level” and

“Ext1” meet.

- Press Enter to connect the two parameters.

You now have your pedal connected to the In level of the

Pitcher, which means that you can control the amount of

pitch with your foot. The function of the pedal is stored with

the preset.

A lot of the ROM presets are setup for various pedal

functions, they are all using Ext1 as Modifier.

How to set up my MIDI board

The G-Force is capable of using a lot of the existing boards

on the market for standard program change. Here is what

you do to set your board up with the G-Force:

- Connect your board to the MIDI In socket on the back

panel of the G-Force.

- Press the I/O Setup key.

- Use the < > Arrow keys to select the MIDI display.

- Set the “Basic channel” to the same as your MIDI board.

Your board is now be able to change ROM presets on the

G-Force.

How to change User presets using my MIDI board

If you want to change User presets in the G-Force via your

board this is what you should do:

- Enter the I/O Setup, MIDI display again.

- Scroll down to “Mapping mode” using the Parameter wheel.

- Select “Into User bank” using the Value wheel.

Your board should now be able to change the User presets

(given that you made some) of the G-Force.

How to use some of the extra functions of my board

with the G-Force

A lot of boards on the market have the possibility of

performing MIDI on/off functions, MIDI bypass etc. The G-

Force has a list of board defaults that makes it possible to

setup these boards really fast. These are the boards in the

list:

ADA MXC

ART X-15 Ultrafoot

DMC Ground Control

Rocktron All Access

Roland FC-200

Custom Audio Electronics RS-10

TC Electronic G Minor

Lexicon MXP R1

If you own one of these boards here is what to do to set it up:

- Enter the I/O Setup, Control display.

- Scroll down to “Model” using the Parameter wheel.

- Select your board and press Enter to load the settings.

The G-Force is now setup to respond to the default

settings of the current board.

If your board is not in the list, here is what to do to setup

some of extra functions anyway:

- Enter the I/O Setup, Control display.

- Scroll down to the function you want to control.

- Press Enter to activate the Learn function.

- Press the switch or pedal you want to use for the

current function.

You can perform this Learn function on all the parameters

in the Control display.

How to Recall a single block from

an existing preset

The G-Force have a possibility of Recalling a single block

from one preset into another. Try to Recall ROM preset #

23, called “Stereo Touchwah”. Now we will Recall the Filter

block from ROM preset # 12, called “Mono Farout Phaser”.

- Press Recall.

- Dial the Parameter wheel to place the cursor on “Select”.

- Dial the Value wheel until the matrix cursor is placed on

“FIL”.

- Move the cursor back to “Preset” using the Parameter

wheel.

- Select preset 12 and press Enter to load the Filter block

into the current Routing.

The Filter block of preset 12 is now loaded into preset 23.

This partial Recall function can of course Recall blocks

from ROM, User and Card presets.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 62 63

Commentaires sur ces manuels

Pas de commentaire

Tc-electronic G-Force Manuel d'utilisateur Page 17

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Tc-electronic G-Force