Tc-electronic Vortex Flanger Manuel d'utilisateur télécharger pdf (Page 13)

will most likely be to activate the buffer in the first and last pedal in the signal chain. Can you hear the

differencebetweenapedalinTrueBypassorBufferedBypass?Maybe,maybenot,–manyfactors

apply.Active/passivepick-ups,singlecoil/humbucker,cablequality,ampimpedanceandmore.We

cannot give a single ultimate answer. Use your ears and find the best solution for your setup!

Kill-Dry on/off – With Buffered Bypass activated (upper switch to the right), the lower dip-switch sets

Kill-Dry on/off. Kill-Dry removes all direct signal from the pedals output and is the mode to use when

the pedal is placed in a parallel effects loop.

Kill-DryisNOTanoptioninTrueBypassmode.

Changing battery - Unscrew the thumb-screw on the back of the pedal and detach the back-plate.

Un-mount the old battery and attach the new battery to the battery clip making sure the polarity is

correct.Thenremounttheback-plate.Tosavebatterylife;removetheinputjackwhenyoudon’tplay.

Batteries must never be heated, taken apart or thrown into fire or water. Only rechargeable

batteries can be recharged. Remove the battery when the pedal is unused for a longer period of

time. Dispose batteries according to local laws and regulations.

1 2 ... 8 9 10 11 12 13 14 15

Pas de commentaire

Tc-electronic Vortex Flanger Manuel d'utilisateur Page 13